You are here

For special applications: the configurable SmartLED Converter

The SmartLED series LED converter provides the perfect controller solution for TFT display backlights, because they can be adjusted exactly to the requirements of your application. Special applications are not a problem for the SmartLED converters: The SmartLED-II for example is suitable for explosion-protected areas because its low voltage prevents air discharge arcing.

Configurable SmartLED-IV Converter

For a glare-free operation in the dark the SmartLED converter dims the LED backlight to any value between 0 and 100 percent (in up to 15,000 steps). This enables reducing the brightness drastically for eye-friendly night operation, for example, in ships or trains. For TFT displays, which include an NVIS (Night Vision Imaging System) compatible backlight in addition to the LED backlight, the converters provide a NVIS mode. Here, the display is switched to the NVIS backlight when necessary.

The SmartLED converters are available in three versions with different input and output voltages. A wide operating temperature range from -30 to +70°C / (80°C) enables use in harsh environments. The centerpiece of the SmartLED converter is a 32 bit ARM processor, which links all input and control signals and allows extensive customizations.

Using the SmartLED rover user software you can configure and flash all 3 variants of SmartLED converter for your specific project . Among others, the LED current, PWM frequency, PWM settings for the minimum and maximum brightness and active LED outputs can be individually set. You can store the configurations you create and transfer them easily to other SmartLED converters. This allows easy serial production of precisely configured converters for various applications. Thus, the SmartLED converter is a universal base for your custom projects.

The possibilities are endless, please contact us.

Please click here for more information on our SmartLED series.